Elbow Plate to fit the Active Hand Crank Blower to the Centaur Firepots

Includes 4 each of the Bolts, Flat Washers, Lock Washers and Nuts to attach to the flange on the firepot elbow. Pipe Nipple (item code PN1-14) and Locknuts (item code LOCKNUT1-14) sold separately.
1 each of item HCBEP - Elbow Plate to fit the Zomax Hand Crank Blower to the Centaur Firepots After the Pipe Nipple is secured to the Elbow Plate, attach the Elbow Plate to the flange on the elbow of the Centaur Firepot.
2 each of item PN1-14 - 1-1/4" Pipe Nipples (Sold Individually) One Pipe Nipple will get attached to the blower and the other Pipe Nipple will go on the Elbow Plate.
2 each of item LOCKNUT1-14 - 1-1/4" Locknut (Sold Individually) Tread one Locknut onto the Pipe Nipple. Put the Pipe Nipple through the Elbow Plate and then thread the other Locknut on the other side of the Pipe Nipple. The Locknuts are holding the Pipe Nipple in the middle of the Elbow Plate.
3 feet of item 5262K68 - 1-7/8" High-Temperature Rigid Metal Duct Hose (Sold per foot) The Rigid Metal Duct Hose goes on the Pipe Nipple attached to the Zomax Blower while the other end is attached to the Pipe Nipple that is on the Elbow Plate fastened to the Firepot.
2 each of the item CLAMP2 - 2" Exhaust Clamp (Sold Individually) The Clamps will fasten the 1-7/8" Rigid Metal Duct Hose to the Pipe Nipple fastened to the Zomax Blower and the other end of the Duct Hose to the Pipe Nipple attached the Firepot Flange.

Blower:

Conversion Kit for Blower: